SUNFX PRO PROFESSIONAL TANNING SYSTEM
PRO SERIES MINI
The SunFX Pro Mini turbine is very much like the SunFX Pro Professional Series Tower. It allows
a constant supply of air to be placed through the spray applicator. Air is taken in at the base of the
unit then through the hose and directed to the applicator.
The Pro Series Mini is designed to be mounted conveniently on the wall. It can also be placed on
the oor.
If choosing a oor location please ensure the turbine unit is on a at working surface as
this will prevent the vent being covered which may cause overheating and damage to the
turbine motor. We also recommend that the turbine be placed as far away from the spray
area as possible to limit any spray being sucked in by the vent. You will nd the Mini series
has an intake for the hose and a place to plug in the power cord at the base.
A wall mounting kit is provided enabling you to attach the turbine to the wall.
For added convenience an applicator holder is included. This holder is designed to be mounted on
the wall. (separate instructions for mounting are provided in the start up kit)
BASIC FUNCTIONS OF
THE SPRAY
APPLICATOR
The new SunFX Pro Series Applicator
has a very simple design. Please take a
few moments to familiarise yourself
with these basic features.
2
To Next Page
Loading...