SunFX Pro - Hose Attachment & Power Cord; Your System Is Now Ready to Use

To Next Page

To Previous Page

HOSE ATTACHMENT & POWER CORD

STEP 5

ATTACHING HOSE TO TURBINE

The hose has 2 small tabs on the end. Position these

correctly with the slots in the base of the turbine and

then GENTLY turn anti-clockwise to lock the hose into

the unit.

CAUTION:

Excessive force may result in damage to these parts.

STEP 6

PLUG IN POWER CORD

FIRMLY push the power cord into the slot on the base

of the turbine or Mini and plug into power socket on the

wall.

YOUR SYSTEM IS NOW READY TO USE

STEP 7

TURN SYSTEM ON TO START SPRAYING

The power switch is located conveniently underneath the top of the Pro Tower system or on the

side of the Pro Mini system.