1 Safety Instructions User Manual
2
Before Installation
There is a risk of injury if the product is mishandled!
y Always follow the instructions in the manual when moving and
positioning the inverter.
y The weight of the equipment can cause injuries, serious wounds, or
bruising if mishandled.
During Installation
Prior to securing the inverter to the wall, it is crucial to make certain that the inverter
is not electrically connected.
System performance can be impaired by poor ventilation!
The equipment requires well ventilation during operation. It is essential to
keep the unit upright and nothing covering the heat sink to let the
equipment interior well cool down.
During Electrical Connection
Lethal voltage exists!
PV arrays will produce electrical energy when exposed to sunlight and thus
can cause an electrical shock hazard.
y Wiring of the PV arrays should only be performed by qualified personnel.
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
To Next Page
Loading...
Need help?
General
