User Manual 1 Safety Instructions
3
During Inverter Operation
There is a risk of inverter’s damage or personal injury!
Do not disconnect DC connectors while the inverter is under AC load! First
de-energize the equipment from the dual power sources and then verify
that there is no voltage existing.
There is a risk of burns!
Avoid touching device hot parts (such as the heat sink) during operation.
Only the LED indicator panel and the optional DC switch can be touched
during inverter operation.
Maintenance and Service
y Any malfunction that may impair the inverter safety operation must be
repaired immediately before the inverter is restarted.
y Inverter contains no customer serviceable parts inside. Please contact
local authorized personnel if any service work is required.
Servicing of the device in accordance with the manual should never be
undertaken in the absence of proper tools, test equipments or the more
recent revision of the manual which has been clearly and thoroughly
understood.
To Next Page
Loading...
Need help?
General
