Need help?Do you have a question about the Sungrow SG60KU-M and is the answer not in the manual?
General| Model | SG60KU-M |
|---|---|
| Max DC Input Voltage | 1100 V |
| Number of DC Inputs per MPPT | 2 |
| Max. Input Current per MPPT | 26 A |
| THDi | < 3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| MPPT Voltage Range | 200 V - 1000 V |
| Rated AC Output Power | 60000 W |
| Max. AC Apparent Power | 66 kVA |
| Rated AC Voltage | 400 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Power Factor at Rated Power | >0.99 |
| Protection Class (According to IEC 62109-1) | Class I |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Forced air cooling |
| Humidity Range | 0-100% (non-condensing) |
Key safety guidelines for installation and operation.
All installation and electrical work must be performed by qualified personnel.
Safety precautions to observe before commencing installation.
Safety precautions to follow during the installation process.
Safety measures for electrical connection procedures.
Safety procedures related to maintenance and service operations.
Notices regarding improper servicing and electrostatic discharge.
General safety notices, including country setting precautions.
Summary of the steps involved in the installation process.
Procedures for unpacking and inspecting the inverter upon receipt.
Instructions for safely transporting the inverter to its installation location.
Detailed steps and considerations for vertical inverter mounting.
Criteria for choosing an optimal and safe installation site.
Step-by-step guide for physically mounting the inverter.
Specific procedures for mounting the inverter on concrete surfaces.
Specific procedures for mounting the inverter on metal frames.
Detailed steps and considerations for horizontal inverter mounting.
Procedures and requirements for connecting to the AC grid.
Essential requirements for the AC side connection.
Procedures and requirements for connecting to PV arrays.
Configuration details for the inverter's PV input ports.
Step-by-step procedures for connecting PV arrays.
Instructions and requirements for grounding the inverter.
General troubleshooting guide for common issues.
Diagnosing issues based on LED indicator status.
Identifying and resolving faults displayed on the LCD screen.
Setting protection parameters for inverter safety.
Setting protection parameters for single-stage operation.
Setting protection parameters for multi-stage operation.
Configuration of parameters for protection recovery.
Guide to setting communication parameters.
To Next Page
