To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG6.0RS-L and is the answer not in the manual?
General| Model | SG6.0RS-L |
|---|---|
| MPPT Voltage Range | 50 V - 500 V |
| Number of MPPTs | 2 |
| THDi | < 3% |
| Cooling Method | Natural Convection |
| Dimensions (W x H x D) | 370 x 480 x 160 mm |
| Maximum Efficiency | 98.4% |
| Ingress Protection Rating | IP65 |
| Rated Power | 6000 W |
| Rated AC Output Power | 6000 W |
| Max. AC Apparent Power | 6600 VA |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Rated Grid Frequency | 50/60 Hz |
| DC Switch | Integrated |
| Operating Temperature Range | -25 °C ~ +60 °C |
| AC Output Voltage Range | 180-280 V |
| Communication Interfaces | RS485 |
| Power Factor at Rated Power | 1 (Adjustable ±0.8 leading to ±0.8 lagging) |
| Power Factor | 1 (Adjustable ±0.8 leading to ±0.8 lagging) |
General guidelines for safe installation, operation, and maintenance.
Ensures safe handling and inspection during product unpacking.
Critical safety measures to follow before and during physical installation.
Safety rules to observe while the inverter is operating.
Safety measures to follow before, during, and after maintenance.
Explains the basic functions and protection features of the inverter.
Crucial safety precautions for the physical mounting process.
Specifies ideal installation environments and locations for optimal performance.
Step-by-step guide for physically installing the inverter on a wall.
Mandatory safety instructions for all electrical connections.
Specifications for DC and AC cables, including type, diameter, and cross-section.
Procedures and requirements for connecting the external protective ground.
Step-by-step guide for powering on the inverter and the system.
Identifies common fault codes and provides corrective measures for resolution.
