19
PURPOSE OF DIGITAL INPUT 6 ALARM
Digital Input Only
Selected: The Digital Input will act as a standard “Low-Active” Digital Input.
Digital Input + continuous preheating
Selected: Similar to Black panel after IGN-OFF the OBU will start to monitor the temperature when
this Digital Input becomes active.
PC Alarm start
Selected: The PC will be started automatically if this Digital Input becomes active. Additional it will
store all signal levels currently present at the Digital Inputs for later use.
Security start
Selected: Similar to Silent Start except that you cannot reactivate the display or the sound system.
Not selected: The PC starts up normally.
GPS and SIM
Internal GPS is not in use
Selected: The internal GPS is deactivated.
Not selected: The internal GPS is used.
Reset GPS module if it stops sending characters
Selected: The embedded system observes the GPS receiver output and resets the module if
charaters are not received within 4 seconds.
Not selected:The GPS receiver output is not observed.
Internal SIM Holder Is Always Empty
Selected: SIM card is not inserted, error code 5 is disabled.
Not selected: If SIM card is not inserted, error code 5 alert at start up.
To Next Page
Loading...