EasyManua.ls Logo

Sunlighten mPulse - PRE-INSTALLATION GUIDELINES; Dedicated Outlet and Assembly; Critical Operating Warnings

Sunlighten mPulse
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
WARNINGS &
DISCLOSURES
WARNING: READ BEFORE OPERATING
To reduce risk associated with hazardous voltage & re:
Unplug the sauna from electrical outlet before storage or when not in use for
expanded periods of time
Do not operate the sauna if its not on a dedicated electrical circuit, or has a damaged
power cord/plug
If the sauna is not working properly or an odor persists, immediately unplug the sauna
Do not leave the sauna unattended while heating for longer than the saunas pre-set
time periods
Never cover holes or oor grate with towels, mats, garments, etc.
PRE-INSTALLATION
1. Have a certied electrician install a dedicated outlet for sauna.
Failure to do so will void all warranty.
2. Remember your sauna should be assembled by 2 or more people.
3. Do not place plumbing or plumbing xtures in the sauna.
4. Keep all liquids away from the heating panels and electronics.
5. Install sauna on a level surface.
6. Install sauna in an area that is dry and protected from the weather.
7. Keep ammable objects and corrosive chemical substances away
from the sauna.
8. Installation of the sauna in an area below standard room temperature
can increase warm up time

Other manuals for Sunlighten mPulse

Related product manuals