Sunlighten mPulse - OPERATING INSTRUCTIONS; Control Tablet Power and Setup

7
OPERATING INSTRUCTIONS
ANDROID CONTROL TABLET
1. Power ON/OFF
To turn On: Press and hold the power button in the lower right corner for 5 seconds,
until the screen turns on. The screen will be blank for a few seconds before the
Sunlighten logo appears.
If left on, the tablet will go into sleep mode and can be woken by quickly touching the power
button.
To turn O: Press and hold the power button for 1-2 seconds and select “shutdown” on the
screen to turn o.
2. Initial Set Up
Upon rst startup or a factory reset you will be prompted to congure initial settings:
• Temperature Unit Select: Fahrenheit or Celsius
• Language preference
• Usage Select: Residential or Commercial mode
• Serial Number: Located on the back of the oor panel of sauna. It is listed in
the following format: (P)(Model Size)(First Letter of Wood Type) – (Four Digit
Identier)