Sunlighten Signature Series User Manual

10
7. PLACING THE TOP PANEL
Before placing the roof, unscrew the top 2 “dust cover” panels and remove
(you will need to access connections later). Pull all wires from the wall panels
up and drape over side walls. Lower the top panel onto the assembled sides
with the light over the door and power cord from roof in the back. The roof
grooves should fit over the wall panels. Make sure that connections in roof
do not get pinched between roof and walls during installation.
E
F

Sunlighten Signature Series Specifications

General

Brand	Sunlighten
Model	Signature Series
Category	Plumbing Product
Language	English