Sunrain YC-007 - Accessories Description

1. Accessories description
Each unit produced by our factory is with the following accessories:
For function you need to purchase at least the following parts for each unit:
No.
Name
Qty.
use
1
Water pump
1
Cycle the heated water
2
Filter system
1
Protect the heat pump from pool water
3
Water pipes system
1
Connect the equipment and make circulation
NOTE
The types and quantity of the water pipes, valves, filter equipment, sterilizing equipment which
used for the swimming pool heating/circulation pipe system, depend on the project design. We do
not suggest to install auxiliary electric heaters in the system. If must install auxiliary electric
heaters, must install the electric heaters by the specialized persons, and our company has no
responsibility for all the problem cause by the auxiliary electric heater.
No.
Name
Qty.
Use
1
Installation & Operation Manual
1 PC
Guide users to install the system
2
Wire controller
1 PC
Used for the man-machine operation interface
3
Wire controller connecting cable
1 PC
Connect wired controller to heat pump unit
4
Drain-pipe
1 PC
Used for draining the condensate water
5
Drain-pipe connector
1 PC
Connect the drain pipe to the heat pump unit
6
Rubber shock absorber
4 PCS
Reduce vibration and reduce noise
7
Heat pump unit
1 SET
For heating water