Range of application:
1.Power supply: 220-240V/~60Hz.
2.Environment temperature: 19.4°F
〜
109.4°F
：
3.Working water temperature: Min. inlet water temperature 46°F,Max. outlet Water
Temperature 104°F. If the system is always used beyond the available water range,
please contact with manufacturer.
● The installation shall be done by the professional persons, to prevent leaking, electric shock, or fire
disaster.
● Confirm the ground connection, if the ground connection is not correctly done, it may cause electric
shock.
● When install the heat pump in a small room, must keep well ventilated.
● Don't put finger or sticker into the air inlet or air outlet. Because the internal rotor high-speed
operation may cause injury.
● When an exception happens (burning smell), turn off the manual power switch immediately, stop
operating, and contact with after-sale service department. If continue the abnormal operation, it may
cause electric shock or fire disaster.
● When the unit needs to be removed or re-installed, please entrust after-sale service department
and specialized personnel to do it. If the installation is not well done, it may cause unit operation
failure, electric shock, fire, hurt, leaking, etc.
● Must not be unauthorized reformed, otherwise it may cause electric shock or fire.
To Next Page
Loading...
