6
KM-235 Series are intended to be used for industrial purposes for sewing textiles and
other similar materials. Carefully study the following instructions before operating the
machine.
ⓐ Read the manual thoroughly and understand the instructions fully before use.
ⓑ Put on proper safety garments.
ⓒ While the machine is in motion, keep your hands or any part of your body away from
moving parts, e.g., needle, hook, thread take-up lever and pulley, etc.
ⓓ Do not remove any form of safety covers while the machine is in use.
ⓔ Be sure to connect the ground (earth) wire.
ⓕ Before opening electric boxes such as the control box, shut down the power supply and
make sure the power switch is in “off”mode.
ⓖ Stop the machine before threading the needle or checking after sewing work is finished.
ⓗ Never turn the power switch on with the pedal down.
ⓘ Do not use the machine if the cooling fan is clogged. Clean the air filter embedded in the
control box at least once a week.
ⓙ Keep the machine away from strong electromagnetic fields such as high-frequency
welding machines.
1-4) Machine
operation
Caution
Caution
ⓐ Safety label: Safety instructions for machine operations
ⓑ Thread take-up lever cover: A device designed to prevent the human body from coming
in contact with the thread take-up spring
ⓒ Belt cover: A device intended to avoid potential risks of getting hands, feet or clothes
jammed by the belt
ⓓ Finger guard: A device built to keep fingers away from the needle.
1-5) Safety device
Caution
Always start the machine with safety covers in place since
fingers or hands could be injured or cut off by the belt. Turn off
the power switch when conducting a regular check on the
machine.
ⓓ
ⓐ
ⓒ
ⓑ
To Next Page
Loading...
