47
When you have a new version of the machine operating program to install, you should make a copy of the
old program before installing the new one. Back-ups are always a good idea. Once the new version is
successfully installed you can back that up as well.
Follow these directions to back up the current system and install the new operating program into the
machine memory.
LESSON: Copy the version of the operation program stored in memory to disk 1 (back-up) and load the
new version into memory from disk2.
Press +
simultaneously when
“= = = SWF-EMB Vx.xx = = =”
appears on the screen.
Insert DISK1 into the floppy
driver. Then, move the cursor to
“2. VERSION BACKUP”.
1. VERSION INSTALL
2. VERSION BACKUP
3. ENCODER SETTING
4. C/C SETTING
To Next Page
Loading...
Need help?
General
