60
1. GNT2910: Function that reads data from the Tape Reader.
2. GNT4604: Function that reads data from the Tape Reader.
3. SERIAL: Function that enables data correspondence between the PC and Machine.
4. PARALLEL: Data reading function from the SWF-NET1.
LESSON: Read data from GNT 2910 and store in Location #25.
After moving the cursor to
GNT2910, Press
Place the cursor at 25 to save it in
Location#25.
press
When ready, Press
SELECT EMPTY ROOM
==> 15
PRESS SET TO START !
==> EXIT TO PREVIOUS
NOW DATA READING !
To Next Page
Loading...
