72
Move the cursor to set up the
ANGLE and press
Input “45” by using the numerical
keys. Press
MIRROR, START ST, X SATIN,
and Y SATIN are Set up the same
as above.
Use the cursor key to check if all
the settings have been entered
correctly.
ANGLE : 0
[RANGE : 0 - 359 ]
==>
1] X_SCALE : 150[%]
2] Y_SCALE : 120[%]
3] ANGLE : 45
4] MIRROR : NO MIRROR
1] X_SCALE : 150[%]
2] Y_SCALE : 120[%]
3] ANGLE : 45
4] MIRROR : Y MIRROR
4] MIRROR : Y MIRROR
5] START ST : 100 st
6] X SATIN : 3
7] Y SATIN : 2
SPEED : 0[RPM]
0/ 1991[00%]
TOTAL : 258051[ST]
NEEDLE : 1[6] 1
Press
To Next Page
Loading...
