SunStar SWF/B-T1201C - Page 77

71
Move the cursor to set up the X
SCALE and press
Input “150” by pressing the
numerical keys.
Move the cursor to set up the
Y SCALE and press
Input “120”the same way as above
and press .
The Y scale has been set at “120”.
X_SCALE : 100
[RANGE : 50-200[%]]
==>
X_SCALE : 100
[RANGE : 50-200[%]]
==>150
Y_SCALE : 100
[RANGE : 50-200[%]]
==>
1] X_SCALE : 150[%]
2] Y_SCALE : 100[%]
3] ANGLE : 0
4] MIRROR : NO MIRROR
The X scale has been setup as “150”
1] X_SCALE : 150[%]
2] Y_SCALE : 120[%]
3] ANGLE : 0
4] MIRROR : NO MIRROR
The Y scale has been setup as “120”
Press