RP-DS800 ENGLISH MANUAL
11
With ATS in SW (mode B), those existing memories will
not be replaced; all the newly found radio stations would
be stored in the blank memories addresses.
Method 2: MANUALLY STORING STATION
1. Tune to your desired station, press the [M] button once
and notice the PRESET number flashing in the upper
right corner of the display.
2. While it flashing, press the [M] button to store it into the
memory or wait for 3 seconds to store it automatically.
If you want to store it into another PRESET memory, just
rotate the tuning knob of your choice, and press the [M]
button to confirm.
Method 3: SEMI-AUTO STORING STATION
1. Short press the [VF] button to enter frequency status.
2. Long press [VF] button with [ ] moving to activate the
Auto-browse function.
3. While tuning to your favor station, you can direct store it
into the next available memory by pressing on the [M]
button with PRESET flashing. The Auto frequency
browsing keeps on going unless you short press the [VF]
button again.
To Next Page
Loading...