Sunstech RP-DS800 - Auto Browse Station; Auto Browse Memory

SLEEP
Auto-scan with pre-listening
moving
Frequency
running
Method 3: AUTO BROWSE STATION
1. Turn on the radio and short press
the [VF] button with the frequency
flashing.
2. Long press the [VF] button with
[ ] moving to scan from one
station to another, staying on
each stations for about 5
seconds.
3. To stop auto browse function,
simply press the [VF] button.
Note: When the radio search & stop to a station, just press
[M] button once to store it.
RP-DS800 ENGLISH MANUAL
9
Method 4: AUTO BROWSE MEMORY
1. Turn on the radio, short press the
[VM] button with memory page
shows in the upper right corner
and disappears in 5 seconds.
2. Long press [VM] button with
" " flashing to scan from
one memory to another, staying
on each station memory for
about 5 seconds.
3. To stop auto search memory,
simply press the [VM] button.
Note: Please first read [Working with Memory] in next
page before using this function.
flashing
Auto-scan memory with
pre-listening
SLEEP
Method 5: DIRECT KEY-IN FREQUENCY
Short press the [VF] button to enter the frequency mode,
press the numeric keys [0] - [9] to enter the station
frequency directly.