Sunstech TLXRI2485HD - Choosing a Tv Channel; Selecting Tv Sound

BASIC OPERATION
CHOOSING A TV CHANNELCHOOSING A TV CHANNEL
Use the CH+/CH-button on the front panel or the CH+/CH-
CH
, button on the
remote control.
CH
Using 0-9 digital buttons
Example:
Press the + button to increase channel number.
Press the - button to decrease channel number.
You can select the channel number directly by pressing 0 to 9 buttons.
To select 1-digit channel (e.g. Channel 5):
Press the 5 button.
To select 2-digit channel (e.g. Channel 20):
Press the 2 button, follow by 0.
●
●
11
SELECTING TV SOUND
InATV mode, according to the type of sound signal, use the NICAM/EJECT button to select an
appropriate mode from the following: Mono, NICAM Stereo, NICAM DUAL NICAM DUAL .I and II
●
●
●
When a mono program is received, you can only choose .
When a stereo program is received, you can switch between and .
When a bilingual program is received,you can switch among ,
and .
sends the primary broadcast language to loudspeakers.
sends the secondary broadcast language to the loudspeakers.
Mono
NICAM Stereo Mono
NICAM DUAL NICAM
DUAL Mono
NICAM DUAL
NICAM DUAL
I
II
I
II
I
II
Note:
If the stereo signal is weak, it will be switched to Mono automatically.