PART NO. 690809 REV: A 2
Table of Contents
Disclaimer of Liability
2
Safety
3-4
Specifications
5-8
Parts List
9-16
Lift Installation
17-21
Lift Operation
22-25
Maintenance
26-28
Troubleshooting
29
Battery Wiring and Hydraulic Schematic
30-32
Inspection Forms
33-36
Many boats today require specific bunk/support configurations; Multi-hull boats, including but not
limited to pontoon, tritoon, some V-hull and catamaran style boats often require specific bunk con-
figurations to properly support the boat on a boatlift.
In some cases boat hull material and strake layout also may require “a custom engineered” bunk
configuration. Any boat on a Sunstream lift should be supported per boat manufacturer recom-
mendations.
Contact the boat manufacturer to verify how to support the boat. Sunstream is not responsible for
determining the proper way to support each craft that may go on a Sunstream lift.
Inadequate support or incorrect position of a boat on a Sunstream lift may result in damage to the
boat.
Sunstream does not warrant that any bunk/kit configuration will support the hull/sponsons as the
boat manufacturer intends or requires.
Disclaimer of Liability
To Next Page
Loading...
