SRC-3000 User’s Manual
10
Using the Touch Screen Soft Keys
The Touch Screen Soft Keys enable you to operate the SRC-
3000 and your external devices. Use these keys to program
codes from your existing remotes, control your devices, and
set up command sequences called macros. You will hear a
beep when you press a key. To turn the beep off and on,
see on page 29. The SRC-3000 turns itself off after 90
seconds.
Accessing Setup
The following table provides an
overview of major key functions. To
enter setup mode, press a function
key for three seconds; a confirmation
screen appears. Confirm setup mode
entry by pressing the four number keys
that appear (in any order) and then
selecting the desired setup mode.
To Next Page
Loading...
