Sunwave Tech. SRC-3000 - Setting Backlight Mode and Timer

Setting the Backlight Mode
27
Setting the Backlight Mode
Set Backlight On Mode
1. Follow the steps shown in
the Transmission section Steps 1-2,
but select
instead of .
2. Press a numerical key 1-6 to
select the time that the backlight
stays on after pressing a key.
NOTE: The backlight ON time can be
set from 10 to 60 seconds in 10-second
increments, '1' for 10 seconds, '2' for 20
seconds, and so on.