Sunwave Tech. SRC-3000 - Programming Devices with Pre-programmed Codes

Using Pre-programmed Code to Program Devices
15
Using Pre-programmed Code to Program Devices
Follow these instructions to program a device using pre-
programmed codes.
Manually Selecting the Code
1. Select a device (for example
TV).
2. Turn on the target device you
want the SRC-3000 to control.
3. Search for the four-digit code
number of your target device
in the Pre-programmed Code
List.
NOTE: If there is no entry for your target device, try
automatically selecting the code.