SRC-93 SERIES User’s Manual
16
1. Press the device keys to select
the device you want to modify.
(ex. Press TV button)
Press the
button (Page Button) to
change to the Touch Screen page you
want to modify.
Press the
button to show all
available LCD choices for all buttons.
Press the Power
button to show all possible
LCD choices.
2. Touch the button that you wish to
change.
(You may change as many buttons as
you wish.)
3. Each time you touch the button
its appearance will change.
4. Press OK to confirm your changes.
Then press EXIT to leave the SETUP
Menu.
Programming Infrared Codes
There are two methods you can use to program infrared
codes into the SRC-93 SERIES:
• Using Manufacturer Codes: Use this method to automatically
To Next Page
Loading...
