SRC-93 SERIES User’s Manual
40
Displaying Version Number
For technical support reasons, the version number might
be needed by SUNWAVE.
To display the two version number of PROG and DATA,
use the VER selection in the SETUP Menu. Chapter 7 -
Changing SRC-93 SERIES Parameters
Many of the SRC-93 SERIES parameters can be
changed. This chapter explains the different
customizations you can make.
Date and Clock
To change the date and clock use the DTAE selection in
the SETUP Menu:
Enter the year, month, and date first.
1. Use the LEFT and RIGHT arrow
keys to move the cursor and
the UP and DOWN arrows to
change the selection.
Press OK when finished.
Now set the hour, and minutes.
2. Use the arrow keys as in step 1.
Press OK when finished and then
EXIT to leave the SETUP menu.
To Next Page
Loading...
