Sunx DP4-52 - Page 11

PRESSURE SENSORS
DP5/DPH
Head-separated
DP4
DP2
DP3
DP-M
Digital Display
PE
LED Bar Display
DP4
790
DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/
MS-DP-3
Sensor mounting bracket (Optional)
MS-DP-4
Sensor mounting bracket (Optional)
t 2
t 0.079
2-"4.5 "0.177
mounting holes
17
0.669
37
1.457
19.75
0.778
57
2.244
41
1.614
12
0.472
24
0.945
40
1.575
57
2.244
3
0

"4.5 "0.177
mounting holes
4.5
0.177
R16 R0.630
t 2
t 0.079
6
0.236
16
0.630
30
1.181
36.5
1.437
28
1.102
17
0.669
37
1.457
65
2.559
Material: Cold rolled carbon steel (SPCC)(nickel plated)
Note: Use with the panel mounting bracket (MS-DP-1) included with the sensor.
Material: Cold rolled carbon steel (SPCC)(nickel plated)
Note: Use with the panel mounting bracket (MS-DP-1) included with the sensor.
CN-63
Connector (Optional)
CN-63-C2
CN-63-C5
Connector attached cable (Optional)
(9.5)
(0.374)
(6.9)
(0.272)
(5.0)
(0.197)
(9.8)
(0.386)
(6.5)
(0.256)
(2.3)
(0.091)
(1.9)
(0.075)
(8)
(0.315)
(50)
(1.969)
2,000 78.740
(CN-63-C5: 5,000 196.850)
(9.5)
(0.374)
(8.3)
(0.327)
(5.8)
(0.228)
"3.8 "0.150 cable
XAP-03V-1 manufactured by
JST Mfg. Co., Ltd.
Mating connector
Connector pin: BXA-001T-P0.6 manufactured by JST Mfg. Co., Ltd.
Housing: XAP-03V-1 manufactured by JST Mfg. Co., Ltd.
Crimping tool
YC-690R manufactured by JST Mfg. Co., Ltd.
<Housing><
Connector bracket>