EasyManua.ls Logo

Super Star 2400 - General Description

Super Star 2400
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Description
The Super star 2400 is a combination transmitter-receiver designed primarily
for mobile Use. It employs the very latest technology to provide 240 cha-
nnels + 480 channels (+/-5KHz) if operation by means of digital frequency
synthesis with PLL (phase-locked-loop) circuitry. The use of PLL assures a
precise on-frequency operation on every channel in both transmit and rec-
eive mode. The Super Star 2400 also includes many other features which
will provide greater operating convenience and assure optimum communi-
cations under a wide range of conditions.
Operable on 240 channels divided into six groups of 40 channels.
3-way RF Gain switch.
Full noise reduction features - ANL and noise blanker.
5 modes of operation - CW, LSB, USB, AM, or FM - selectable with a rotary
switch.
Provision of PA.
Concentrically mounted Fine and Coarse controls to fine tune to any trans-
missions or operate in inter-channel frequencies.
Tone switch to select receive tonal quality in 2-way.
RF power output switchable in 3-way for required communication range.
TX lamp that indicates you are on-the-air.
External speaker jack for an extra sound source.
The transceiver is ready for connection to a 13.8 Volt DC only negative
ground system.
A high-sensitivity dynamic microphone equipped.
CAUTION
FOR REPLACEMENT OF THE
FUSE IN DC POWER CABLE,
PLEASE BE SURE TO USE
3,5A FUSE.
2

Other manuals for Super Star 2400

Related product manuals