Need help?Do you have a question about the Super Star 2400 and is the answer not in the manual?
General| Brand | Super Star |
|---|---|
| Model | 2400 |
| Category | Transceiver |
| Language | English |
Details frequency composition, range, space, emission, and power source.
Covers sensitivity, selectivity, audio output, and tuning ranges.
Details RF power output, SSB generation, and tuning range.
Controls sound output and power on/off.
Selects groups of 40 channels across six positions.
Adjusts sensitivity to eliminate background noise.
Selects reception/transmission modes like CW, LSB, USB, AM, FM.
Adjusts receiving/transmitting frequencies for fine tuning.
Rotary switch to select channels, indicated by LED display.
Lights up when transmitting.
Digital LED display showing selected channel.
Selects RF power output in three levels: High, Mid, Low.
Changes tonal quality in receiving (High/Low).
Switches between CB mode and Public Address amplifier.
Activates noise blanker for impulse noise reduction.
Activates automatic noise limiter for atmospheric interference.
Selects receiver sensitivity (DX, Mid, Local).
Displays signal strength (receiving) and RF power (transmitting).
Connects the supplied microphone.
Supplied microphone with push-to-talk button.
Accepts PL-259 coaxial connector for antenna.
Connects a CW key using a 3.5mm plug.
Connects an external speaker for additional audio.
Connects a PA speaker for public address operation.
Provides power connection for the transceiver.
Connects the transceiver to a 13.8V DC power source.
Connects the antenna using RG-58/u cable and PL-259 connector.
To Next Page
