Superchips flashpaq 2805 - Tuning; Setting the Screen Contrast; Setting the Screen Backlight; Quick Start - Read & Program My Vehicle Now

Page 7 of 24 Form 0161F 2805 09/2/2008 Superchips Inc .
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
FLASHPAQ Overview and Setup
¾ About
*** Press NEXT to scroll as needed ***
 From the Opening screen
1) Press ENTER – after selection of Tuner Setup
2) Press ENTER – after selection of About
Screen Displays:
• Product description
• Product part number
• “Operating software” Firmware Version #
Visit www.superchips.com
for latest updates
• “Calibration (Tuning File)” Database Version #
Visit www.superchips.com
for latest updates
• Product Serial Number
3) Press OK – Returns to the previous screen
4) Press EXIT – Returns to the Opening screen
¾ Setting the Screen Contrast
 From the Tuner Setup Screen
1) Press ENTER – after selection of Set Contrast
2) Press DOWN/UP & SAVE – adjusts screen contrast to increase
or decrease (text/graphics darkness)
¾ Setting the Screen Backlight
 From the Tuner Setup Screen
1) Press ENTER – after selection of Set Backlight
2) Press DOWN/UP & SAVE – adjusts screen Backlight to
increase or decrease (screen brightness)
3) Press EXIT – returns to Opening screen
Page 8 of 24 Form 0161F 2805 09/2/2008 Superchips Inc .
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Tuning
¾ Quick Start – Read & Program My Vehicle Now!!!
*** Press NEXT to scroll as needed ***
*** Press PLUS/MINUS to adjust settings ***
 From the Opening screen
1) Press ENTER – after selection of Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Press OK - Follow ON SCREEN – Prompts including Vehicle
Ignition ON requests (DO NOT START VEHICLE!!)
5) Press OK – the Stock Files are Saved!!!
6) Press EXIT – returns to the previous screen
 From the Tuning screen
1) Press ENTER – after selection of Change Setup
2) Press SAVE – to select the tuning file
3) Press YES – Adjust the user options?
4) Press SAVE – to adjust Tire Height option
5) Press SAVE – to adjust Speed Limiter option
6) Press YES – to save option changes
7) Press YES – Done changing the Settings?

From the Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Press YES – Program with the tuning file?
3) Press YES – Install the tuning file?
4) Follow ON SCREEN – Prompts including Vehicle Ignition
ON/OFF requests (DO NOT START VEHICLE!!)
5) Press OK – Turn ignition switch off and remove Key
Upon completion, remove cable from vehicle
Your vehicle is now programmed with Superchips tuning! You may
now start your vehicle.