Supermicro A2SAP-H - Page 30

30
A2SAP-H/-E/-L User's Manual
Power LED
The Power LED connection is located on pins 7 and 8 of JF1. Refer to the table below for
pin denitions.
Power LED
Pin Denition (JF1)
Pin# Denition
7 +3.3VSB
8 Power LED LOW
HDD LED
The HDD LED connection is located on pins 5 and 6 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including SATA activities. Refer to the table below for
pin denitions.
HDD LED
Pin Denition (JF1)
Pin# Denition
5 +3.3V
6 HDD Active LOW
1. HDD LED
2. Power LED
Power Button
1
Reset Button
2
HDD LED
Power LED
Reset
PWR
3.3V
3.3V Stby
Ground
Ground
78
1
2