18
A2SDi-HLN4F Series User's Manual
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.
Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-
guration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: It is strongly recommended that you change BMC log-in information upon initial
system power-on. The manufacturer default username is ADMIN and the password is
ADMIN. For proper BMC conguration, please refer to https://www.supermicro.com/
products/nfo/les/IPMI/Best_Practices_BMC_Security.pdf
To Next Page
Loading...
