20
A2SDi-HLN4F Series User's Manual
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the Intel® Atom SoC series processor, the
A2SDi-HLN4F Series motherboard offers maximum I/O expandability, energy efciency,
and data reliability in a 14-nm process architecture, and is optimized for embedded storage
solutions.
The A2SDi-HLN4F Series supports the following features:
• Intel QuickAssist Technology (only available on the 4C/8C/8C+/12C models)
• Intel Manageability Engine
• Intel Turbo Boost Technology (only available on the 2C/16C models)
• Congurable TDP (cTDP) and Lower-Power Mode
• Adaptive Thermal Management/Monitoring
• PCI-E 3.0 Connectivity
• 1GbE Ethernet
• System Management Bus (SMBus) Specication, Version 2.0
• Intel Virtualization Technology for Directed I/O (Intel VT-X, VT-d)
1.3 Special Features
This section describes the health monitoring features of the A2SDi-HLN4F Series motherboard.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
To Next Page
Loading...
Need help?
General
