19
Chapter 1: Introduction
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the Intel® Atom SoC C3000 series processor,
the A2SDi-TP8F/LN4F, A2SDi-16C-TP8F motherboard offers maximum I/O expandability,
energy efciency, and data reliability in a 14-nm process architecture, and is optimized for
embedded storage and microserver solutions
The A2SDi-TP8F/LN4F, A2SDi-16C-TP8F supports the following features:
• Intel QuickAssist Technology (TP8F and 16C-TP8F)
• Intel Manageability Engine
• Intel Turbo Boost Technology (LN4F only)
• Congurable TDP (cTDP) and Lower-Power Mode
• Adaptive Thermal Management/Monitoring
• PCI-E 3.0 Connectivity
• 10GbE Ethernet
• System Management Bus (SMBus) Specication, Version 2.0
• Intel Virtualization Technology for Directed I/O (Intel VT-x and VT-d)
1.3 Special Features
This section describes the health monitoring features of the A2SDi-TP8F/LN4F,
A2SDi-16C-TP8F motherboard. The motherboard has an onboard System Hardware Monitor
chip that supports system health monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
To Next Page
Loading...
Need help?
General
