Supermicro AOC-CTGS-i2T User Manual

3-2
AOC-CTGS-i2T Add-on Card User's Guide
3-2 Before Installation
Before you install the add-on card, follow the instructions below.
1. Power down the system.
2. Unplug the power cord.
3. Use industry-standard anti-static equipment such as gloves or a wrist strap
and follow the precautions on page 3-1 to avoid damage caused by ESD.
4. Familiarize yourself with the server, motherboard, and/or chassis documenta-
tion.
5. Conrm that your operating system includes the latest updates and hotxes.
3-3 Installing the Add-on Card
Follow the steps below to install the add-on card into your system.
1. Remove the server cover and, if any, set aside any screws for later use.
2. Remove the add-on card slot cover. If the slot cover has a screw, place it
aside for later use.
3. Position the add-on card directly over the PCI connector and gently push
down on both sides of the card until it slides into the connector.
4. Secure the add-on card to the chassis. If required, use the screw that you
previously removed.
5. Attach any necessary external cables to the add-on card.
6. Replace the system cover.
7. Plug in the power cord and power up the system.

Supermicro AOC-CTGS-i2T Specifications

General

Brand	Supermicro
Model	AOC-CTGS-i2T
Category	Computer Hardware
Language	English