Preface
About this User's Guide
This user's guide is written for system integrators, IT technicians and
knowledgeable end users. It provides information for the installation and use of the
AOC-CTGS-i2T add-on card.
About this Add-on Card
The AOC-CTGS-i2T is the latest microLP 2-port 10Gbase-T controller for our com-
pact and high density MicroCloud and Twin series servers. With a compact design
and lower power consumption, it can t in small spaces while providing the highest
networking bandwidth for data centers. The AOC-CTGS-i2T with NC-SI allows cus-
tomers to monitor the servers remotely. Based on the latest Intel® X550 controller,
the AOC-CTGS-i2T is an excellent choice for customers who are looking to expand
their network connectivity with highest bandwidth.
An Important Note to the User
All images and layouts shown in this user's guide are based upon the latest PCB
Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, you can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Preface
iii
To Next Page
Loading...
