Supermicro AOC-S100GC-i2C - Page 18

2-6
Super AOC-S100GC-i2C Add-On Card User's Guide
JP4 for NC-SI
Standby by
Power
IPMI
Support
FailOver
Support
WoL
Support
Function Notes
Disable = No
standby Power
to AOC NIC
Yes Yes No
Disable jumper
to disconnect
the standby
power
Default
Enable =
Standby
Power to AOC
NIC
Yes Yes Yes
Enable jumper
to connect
standby power
to AOC NIC
WoL is supported
but limited to
platforms with
su󰀩cient air-ow
when it is in
standby mode
(S5 state).
Please consult
Supermicro before
enabling it.