Supermicro C9Z790-CG - Page 100

Super C9Z790-CG/-CGW User's Manual
100
Graphics Conguration
Graphics Conguration
Note: Only the feature of Primary Display is available for conguring in this submenu
if the installed CPU doesn’t have integrated graphics.
Graphics Turbo IMON Current
Enter a value for the graphics turbo IMON current. The range is 14-31 and the default is 31.
Skip Scanning of External Gfx Card
This feature disables scanning for external graphics cards. When this feature is set to
Enabled, the system will not scan for external graphics cards on PEG and PCH PCIe ports.
The options are Disabled and Enabled.
Primary Display
This feature controls which graphics device will be used as the primary display. The
options are Auto, IGFX, PEG Slot, and PCH PCI.
Internal Graphics
This item keeps the Internal Graphics Device (IGD) enabled, based on setup options. The
options are Auto, Enabled and Disabled.
GTT Size
This feature controls the memory allocation size for the graphics translation table (GTT).
The options are 2MB, 4MB, and 8MB.
Aperture Size
This feature controls the graphics aperture size. For optimal performance, select the size
that matches the installed graphics card's size. The options are 128MB, 256MB, 512MB,
1024MB, and 2048MB.
DVMT Pre-Allocated
This feature controls the DVMT 5.0 Pre-allocated graphics memory size to be used by the
internal graphics device. The options are 0M, 32M, 64M, 96M, 128M, 160M, 4M, 8M, 12M,
16M, 20M, 24M, 28M, 32M/F7, 36M, 40M, 44M, 48M, 52M, 56M, and 60M.
PM Support
This feature enables PM support. The options are Enabled and Disabled.
PAVP Enable
This feature enables PAVP support. The options are Enabled and Disabled.