Supermicro C9Z790-CG - Page 101

Chapter 4: UEFI BIOS
101
Cdynmax Clamping Enable
This feature enables Cdynmax Clamping. The options are Enabled and Disabled.
Graphics Clock Frequency
This feature controls the graphics clock frequency. Select the highest clock frequency
supported by the platform. The options are 192 Mhz, 307.2 Mhz, 326.4 Mhz, 556.8 Mhz,
652.8 Mhz, and Max CdClock freq based on Reference Clk.
HDD Security Conguration
Note: This feature appears when a hard drive is detected.
HDD Password Conguration
The following security information will be displayed:
• Security Supported
• Security Enabled
• Security Locked
• Security Frozen
• HDD User Pwd Status
• HDD Master Pwd Status
Set User Password
Press <Enter> to create a new or change an existing HDD password. Please do power
cycle after setting hard disk passwords.
Note: This feature is available for conguring when the status of Security Frozen is No.
HTTP BOOT Conguration
HTTP BOOT Conguration
HTTP Boot Policy
Use this feature to select the policy of HTTP Boot. The options are Apply to all LANs, Apply
to each LAN, and Boot Priority #1 instantly.
Note: To congure each LAN port, please select Apply to each LAN or Boot Priority #1
instantly. Only the Instance of Priority 1 appears when selecting the option of Apply to
all LANs.