Supermicro C9Z790-CG - Page 102

Super C9Z790-CG/-CGW User's Manual
102
HTTPS Boot Checks Hostname
Selects whether HTTPS Boot Checks Hostname of TLS certicates matches the hostname
provided by the remote server. The options are Enabled and Disabled (WARNING: Security
Risk!!).
Warning: Disabling this option is a violation of RFC 6125 and may expose you to Man-in-
the-Middle Attacks. Supermicro computer, Inc. is not responsible for any and all security
risks incurred by you disabling this option.
Priority of HTTP Boot
Instance of Priority 1
Use this feature to rank the targeted port.
Select IPv4 or IPv6
Use this feature to select the Targeted LAN port that is boot from IPv4 or IPv6. The options
are IPv4 and IPv6.
Boot Description
Use this feature to input the HTTP boot option description, otherwise the boot option for
the URI will not be created. The maximum length should not more than 75 characters.
Boot URI
Use this feature to input the URI address for HTTP Boot feature. The maximum length
should not more than 128 characters.
Instance of Priority X
Use this feature to rank the targeted port.
Notes: 1. The number of X is depending on the motherboard's hardware and available
for conguring when the HTTP Boot Policy is set to Apply to each LAN or Boot Priority
#1 instantly. 2. The features below will be hidden if the option of Instance of Priority X
sets to 0.
Select IPv4 or IPv6
Use this feature to select the Targeted LAN port that is boot from IPv4 or IPv6. The options
are IPv4 and IPv6.
Boot Description
Use this feature to input the HTTP boot option description, otherwise the boot option for
the URI will not be created. The maximum length should not more than 75 characters.
Boot URI
Use this feature to input the URI address for HTTP Boot feature. The maximum length
should not more than 128 characters.