Supermicro C9Z790-CG - Page 83

Chapter 4: UEFI BIOS
83
VccIn Aux IMON Slope
Enter a value for the VccIn Aux IMON Slope. The range is 0-200 in 1/100 increments
and the default is 100.
VccIn Aux IMON O󰀨set
Enter a value for the VccIn Aux IMON O󰀨set. The range is 0-63999 and the default is 0.
VccIn Aux IMON Prex
Use this feature to set the prex value as a positive (+) or a negative (-). The op-
tions are “+” and “-”.
Vsys/Psys Critical
This feature enables the Vsys/Psys Critical function. The options are Disabled and
Enabled.
Assertion Deglitch Mantissa
Enter a value for Assertion Deglitch Mantissa. The default is 1.
Assertion Deglitch Exponent
Enter a value for Assertion Deglitch Exponent. The default is 0.
De assertion Deglitch Mantissa
Enter a value for De Assertion Deglitch Mantissa. The default is 13.
De assertion Deglitch Exponent
Enter a value for DE Assertion Deglitch Exponent. The default is 2.
VR Power Delivery Design
This feature controls the ADL desktop board design used for the VR settings override
values. The default is Auto which uses the board ID to determine the board design.
Acoustic Noise Settings
Acoustic Noise Mitigation
This feature enables Acoustic Noise Mitigation, which mitigates acoustic noise on cer-
tain CPUs when they are in deep C-states. The options are Disabled and Enabled.