Supermicro C9Z790-CG - Page 84

Super C9Z790-CG/-CGW User's Manual
84
*If the feature of Acoustic Noise Mitigation is set to Enabled, the following
features will become available for conguration:
Pre Wake Time / Ramp Up Time / Ramp Down Time
Enter a value for the desired feature. The range is 0-255. The default is 0.
IA VR Domain / GT VR Domain
Disable Fast PKG C State Ramp for IA / GT Domain
This feature disables fast package C-state ramping in a specic domain. If set to
FALSE, the selected domain will continue to fast ramp. If set to True, the selected
domain will disable fast ramping. The options are False and True.
Slow Slew Rate for IA / GT Domain
This feature controls the slow slew rate for a specic domain. The options are Fast/2,
Fast/4, Fast/8, and Fast/16.
Core/IA VR Settings / GT VR Settings
VR Cong Enable
This feature enables VR Cong. The options are Disabled and Enabled.
*If this feature above is set to Enabled, the features will become available:
• Current AC/DC Loadline
• Current DC Loadline
• Current PSi1/2/3 Threshold
• Current Imon Slope/O󰀨set
• Current VR/Tdc Current Limit
• Current Voltage Limit
AC Loadline
Enter a value for AC Loadline. The range is 0-6249 in 1/100 mOhms and the default
is 0 for Auto.
DC Loadline
Enter a value for DC Loadline. The range is 0-6249 in 1/100 mOhms and the default
is 0 for Auto.