Supermicro C9Z790-CG - Page 85

Chapter 4: UEFI BIOS
85
PS Current Threshold1
Enter a value for PS Current Threshold1. The range is 0-512 in 1/4 A increments.
The default is 80.
PS Current Threshold2
Enter a value for PS Current Threshold2. The range is 0-512 in 1/4 A increments.
The default is 20.
PS Current Threshold3
Enter a value for PS Current Threshold3. The range is 0-512 in 1/4 A increments.
The default is 4.
PS3 Enable
This feature enables PS3. The options are Disabled and Enabled.
PS4 Enable
This feature enables PS4. The options are Disabled and Enabled.
IMON Slope
Enter a value for IMON Slope. The range is 0-200 in 1/100 increments and the
default is 0 for Auto.
IMON O󰀨set
Enter a value for IMON O󰀨set. The range is 0-63999 in 1/1000 increments and the
default is 0.
IMON Prex
Use this feature to set the prex value as a positive (+) or a negative (-). The op-
tions are “+” and “-”.
VR Current Limit
This feature is reserved and not congurable.
VR Voltage Limit
Enter a value (in mV) for the voltage regulator voltage limit. The range is 0-7999
and the default is 0 for Auto.
TDC Enable
This feature disables or enables TDC. The options are Disabled and Enabled.