Supermicro C9Z790-CG - Page 86

Super C9Z790-CG/-CGW User's Manual
86
TDC Current Limit
Enter a value for the TDC Current Limit, with each whole number equating to 1/8A
(i.e., 1000 = 125A). The range is 0-32767. The default is 0.
TDC Time Windows
This feature controls the TDC Time Window. The default is 1 sec.
TDC Lock
This feature disables or enables TDC Lock. The options are Disabled and Enabled.
IRMS (Available only for Core/IA VR Settings)
This feature disables or enables IRMS. The options are Disabled and Enabled.
RFI Settings
RFI Domain
RFI Current Frequency
RFI Frequency
Use this feature to set a desired RFI frequency (in increments of 100KHz).
FIVR Spread Spectrum
This feature enables or disables the FIVR Spread Spectrum. The options are Dis-
abled and Enabled.
*If this feature above is set to Enabled, the following feature will become avail-
able for conguration
RFI Spread Spectrum
Use this feature to set the Spread Spectrum. The options are 0.5%, 1%, 1.5%, 2%,
3%, 4%, 5%, and 6%.
GT
GT Domain
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz) in the GT
domain. The default is 0.