16
H13SSL-N/NT User's Manual
1.2 Processor and Chipset Overview
Built upon the functionality and capability of the AMD EPYC
TM
processor in an SP5 socket.
The H13SSL-N/NT motherboard oers maximum I/O expendability, energy eciency, and data
reliability in a 5nm process architecture, and is optimized for embedded storage solutions,
networking applications, or cloud-computing platforms.
With support of the new microarchitecture 5nm process technology, the H13SSL-N/NT
drastically increases system performance for a multitude of server applications.
The AMD EPYC
TM
processor supports the following features:
• ACPI Power Management Logic Support Rev. 6.2
• Adaptive Thermal Management/Monitoring
• PCIe 5.0 w/transfer rate of up to 32.0 GT/s and SATA 3.0 w/ transfer rate of up to 6.0 GB/s
• System Management Bus (SMBus) Specication Version 3.1.1
1.3 Special Features
This section describes the health monitoring features of the H13SSL-N/NT motherboard. The
motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered o (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
To Next Page
Loading...
