H13SSL-N/NT User's Manual
92
4.7 Boot Settings
Use this tab to congure Boot Settings:
Boot Mode Select
Use this item to select the type of device that the system is going to boot from. The options
are Legacy, UEFI, and DUAL. The default setting is UEFI.
Legacy to EFI Support
This option Disables or Enables the system to boot to an EFI OS after the boot failed from
the legacy boot order.
FIXED BOOT ORDER Priorities Section
This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.
To Next Page
Loading...
