Supermicro H13SSL-N - 2.7 Connectors

38
H13SSL-N/NT User's Manual
Power Switch
The Power Switch connection is located on pins 1 and 2 of JF1. Attach it to a hardware power
switch on the computer case to power on/o󰀨 the system. To force the system to be powered
o󰀨, press the button for at least four seconds. Refer to the table below for pin denitions.
Power Switch
Pin Denitions (JF1)
Pin# Denition
1 Power Switch
2 Grounds
Reset Switch
The Reset Switch connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin denitions.
Reset Switch
Pin Denitions (JF1)
Pin# Denition
3 Reset Switch
4 Ground
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1.
Power Fail LED
Pin Denitions (JF1)
Pin# Denition
5 Power Fail LED+
6 Power Fail LED-
Power Fail LED
LED State Status
Solid on Overhear
Fast Blinking Fan Fail
Slow Blinking Power Fail
2.7 Connectors