Supermicro H13SSL-N - Page 40

40
H13SSL-N/NT User's Manual
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Attach a cable to pin 15 and
pin 16 to show system power status. Refer to the table below for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
15 Power LED+
16 Power LED-
NMI Switch
The non-maskable interrupt switch header is located on pins 19 and 20 of JF1. Attach it to
a hardware NMI switch on the computer case to trigger the NMI. Refer to the table below
for pin denitions.
NMI Switch
Pin Denitions (JF1)
Pin# Denition
19 NMI Switch
20 Ground