Supermicro H13SSL-N - Page 72

H13SSL-N/NT User's Manual
72
No Snoop
Select Enable to support no-snoop mode for each CB device. The options are Disabled and
Enabled.
VGA Priority
Use this setting to select between onboard or external VGA support. The options are Auto,
Onboard and External.
PCIe Ten Bit Tag Support
Use this setting to Disable, Enable or Auto control the PCIe ten bit tags for supported devices.
NVMe Firmware Source
Use this setting to select between the AMI Native rmware support or the device vendor-
dened rmware support. The options are Vendor Dened Firmware and AMI Native Support.
PCI Devices Option ROM Setting:
CPU SLOT1 PCIe5.0 x16 OPROM
Use this setting to enables or disables PCIe Slot OPROM option. The options are Disabled,
Legacy and EFI.
CPU SLOT2 PCIe5.0 x8 OPROM
Use this setting to enables or disables PCIe Slot OPROM option. The options are Disabled,
Legacy and EFI.
CPU SLOT3 PCIe5.0 x16 OPROM
Use this setting to enables or disables PCIe Slot OPROM option. The options are Disabled,
Legacy and EFI.
CPU SLOT4 PCIe5.0 x8 OPROM
Use this setting to enables or disables PCIe Slot OPROM option. The options are Disabled,
Legacy and EFI.
USB Conguration
USB Conguration
USB Module Version
USB Controllers: 4 XHCIs
USB Devices: 2 keyboards, 2 mice, 2 hubs