Chapter 4: UEFI BIOS
87
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the
event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log
is full. The options are Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Enabled and Disabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between 1 to 255.
The default setting is 1.
METW (Multiple Event Count Time Window)
This item is used to determine how long (in minutes) the multiple event counter should wait
before generating a new event log. Enter a number between 0 to 99. The default setting is 60.
Note: Please reboot the system for these changes to take eect.
View SMBIOS Event Log
When Event Logging is on, this item allows the user to view the entries in the SMBIOS event
log. The following categories are displayed:
Date/Time/Error Code/Severity
To Next Page
Loading...
